Page MenuHomestyx hydra
Files F1994798

No OneTemporary
Actions

View Options

diff --git a/conf/default.conf.php b/conf/default.conf.php
index 7476882529..8a6a60101b 100644
--- a/conf/default.conf.php
+++ b/conf/default.conf.php
@@ -1,290 +1,295 @@
<?php
/*
* Copyright 2011 Facebook, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
return array(
// The root URI which Phabricator is installed on.
// Example: "http://phabricator.example.com/"
'phabricator.base-uri' => null,
// The Conduit URI for API access to this install. Normally this is just
// the 'base-uri' plus "/api/" (e.g. "http://phabricator.example.com/api/"),
// but make sure you specify 'https' if you have HTTPS configured.
'phabricator.conduit-uri' => null,
// The default PHID for users who haven't uploaded a profile image. It should
// be 50x50px.
'user.default-profile-image-phid' => 'PHID-FILE-f57aaefce707fc4060ef',
// -- Access Control -------------------------------------------------------- //
// Phabricator users have one of three access levels: "anyone", "verified",
// or "admin". "anyone" means every user, including users who do not have
// accounts or are not logged into the system. "verified" is users who have
// accounts, are logged in, and have satisfied whatever verification steps
// the configuration requires (e.g., email verification and/or manual
// approval). "admin" is verified users with the "administrator" flag set.
// These configuration options control which access level is required to read
// data from Phabricator (e.g., view revisions and comments in Differential)
// and write data to Phabricator (e.g., upload files and create diffs). By
// default they are both set to "verified", meaning only verified user
// accounts can interact with the system in any meaningful way.
// If you are configuring an install for an open source project, you may
// want to reduce the "phabricator.read-access" requirement to "anyone". This
// will allow anyone to browse Phabricator content, even without logging in.
// Alternatively, you could raise the "phabricator.write-access" requirement
// to "admin", effectively creating a read-only install.
// Controls the minimum access level required to read data from Phabricator
// (e.g., view revisions in Differential). Allowed values are "anyone",
// "verified", or "admin". Note that "anyone" includes users who are not
// logged in! You should leave this at 'verified' unless you want your data
// to be publicly readable (e.g., you are developing open source software).
'phabricator.read-access' => 'verified',
// Controls the minimum access level required to write data to Phabricator
// (e.g., create new revisions in Differential). Allowed values are
// "verified" or "admin". Setting this to "admin" will effectively create a
// read-only install.
'phabricator.write-access' => 'verified',
// -- DarkConsole ----------------------------------------------------------- //
// DarkConsole is a administrative debugging/profiling tool built into
// Phabricator. You can leave it disabled unless you're developing against
// Phabricator.
// Determines whether or not DarkConsole is available. DarkConsole exposes
// some data like queries and stack traces, so you should be careful about
// turning it on in production (although users can not normally see it, even
// if the deployment configuration enables it).
'darkconsole.enabled' => true,
// Always enable DarkConsole, even for logged out users. This potentially
// exposes sensitive information to users, so make sure untrusted users can
// not access an install running in this mode. You should definitely leave
// this off in production. It is only really useful for using DarkConsole
// utilties to debug or profile logged-out pages. You must set
// 'darkconsole.enabled' to use this option.
'darkconsole.always-on' => false,
// Allows you to mask certain configuration values from appearing in the
// "Config" tab of DarkConsole.
'darkconsole.config-mask' => array(
'mysql.pass',
'amazon-ses.secret-key',
'recaptcha.private-key',
'phabricator.csrf-key',
'facebook.application-secret',
'github.secret',
),
// -- MySQL --------------------------------------------------------------- //
// The username to use when connecting to MySQL.
'mysql.user' => 'root',
// The password to use when connecting to MySQL.
'mysql.pass' => '',
// The MySQL server to connect to.
'mysql.host' => 'localhost',
// -- Email ----------------------------------------------------------------- //
// Some Phabricator tools send email notifications, e.g. when Differential
// revisions are updated or Maniphest tasks are changed. These options allow
// you to configure how email is delivered.
// You can test your mail setup by going to "MetaMTA" in the web interface,
// clicking "Send New Message", and then composing a message.
// Default address to send mail "From".
'metamta.default-address' => 'noreply@example.com',
// When a user takes an action which generates an email notification (like
// commenting on a Differential revision), Phabricator can either send that
// mail "From" the user's email address (like "alincoln@logcabin.com") or
// "From" the 'metamta.default-address' address. The user experience is
// generally better if Phabricator uses the user's real address as the "From"
// since the messages are easier to organize when they appear in mail clients,
// but this will only work if the server is authorized to send email on behalf
// of the "From" domain. Practically, this means:
// - If you are doing an install for Example Corp and all the users will
// have corporate @corp.example.com addresses and any hosts Phabricator
// is running on are authorized to send email from corp.example.com,
// you can enable this to make the user experience a little better.
// - If you are doing an install for an open source project and your
// users will be registering via Facebook and using personal email
// addresses, you MUST NOT enable this or virtually all of your outgoing
// email will vanish into SFP blackholes.
// - If your install is anything else, you're much safer leaving this
// off since the risk in turning it on is that your outgoing mail will
// mostly never arrive.
'metamta.can-send-as-user' => false,
// Adapter class to use to transmit mail to the MTA. The default uses
// PHPMailerLite, which will invoke PHP's mail() function. This is appropriate
// if mail() actually works on your host, but if you haven't configured mail
// it may not be so great. You can also use Amazon SES, by changing this to
// 'PhabricatorMailImplementationAmazonSESAdapter', signing up for SES, and
// filling in your 'amazon-ses.access-key' and 'amazon-ses.secret-key' below.
'metamta.mail-adapter' =>
'PhabricatorMailImplementationPHPMailerLiteAdapter',
// When email is sent, try to hand it off to the MTA immediately. This may
// be worth disabling if your MTA infrastructure is slow or unreliable. If you
// disable this option, you must run the 'metamta_mta.php' daemon or mail
// won't be handed off to the MTA. If you're using Amazon SES it can be a
// little slugish sometimes so it may be worth disabling this and moving to
// the daemon after you've got your install up and running. If you have a
// properly configured local MTA it should not be necessary to disable this.
'metamta.send-immediately' => true,
// If you're using Amazon SES to send email, provide your AWS access key
// and AWS secret key here. To set up Amazon SES with Phabricator, you need
// to:
// - Make sure 'metamta.mail-adapter' is set to:
// "PhabricatorMailImplementationAmazonSESAdapter"
// - Make sure 'metamta.can-send-as-user' is false.
// - Make sure 'metamta.default-address' is configured to something sensible.
// - Make sure 'metamta.default-address' is a validated SES "From" address.
'amazon-ses.access-key' => null,
'amazon-ses.secret-key' => null,
// -- Auth ------------------------------------------------------------------ //
// Can users login with a username/password, or by following the link from
// a password reset email? You can disable this and configure one or more
// OAuth providers instead.
'auth.password-auth-enabled' => true,
// -- Accounts -------------------------------------------------------------- //
// Is basic account information (email, real name, profile picture) editable?
// If you set up Phabricator to automatically synchronize account information
// from some other authoritative system, you can disable this to ensure
// information remains consistent across both systems.
'account.editable' => true,
// -- Facebook ------------------------------------------------------------ //
// Can users use Facebook credentials to login to Phabricator?
'facebook.auth-enabled' => false,
// Can users use Facebook credentials to create new Phabricator accounts?
'facebook.registration-enabled' => true,
// Are Facebook accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'facebook.auth-permanent' => false,
// The Facebook "Application ID" to use for Facebook API access.
'facebook.application-id' => null,
// The Facebook "Application Secret" to use for Facebook API access.
'facebook.application-secret' => null,
// -- Github ---------------------------------------------------------------- //
// Can users use Github credentials to login to Phabricator?
'github.auth-enabled' => false,
// Can users use Github credentials to create new Phabricator accounts?
'github.registration-enabled' => true,
// Are Github accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'github.auth-permanent' => false,
// The Github "Client ID" to use for Github API access.
'github.application-id' => null,
// The Github "Secret" to use for Github API access.
'github.application-secret' => null,
// -- Recaptcha ------------------------------------------------------------- //
// Is Recaptcha enabled? If disabled, captchas will not appear.
'recaptcha.enabled' => false,
// Your Recaptcha public key, obtained from Recaptcha.
'recaptcha.public-key' => null,
// Your Recaptcha private key, obtained from Recaptcha.
'recaptcha.private-key' => null,
// -- Misc ------------------------------------------------------------------ //
// This is hashed with other inputs to generate CSRF tokens. If you want, you
// can change it to some other string which is unique to your install. This
// will make your install more secure in a vague, mostly theoretical way. But
// it will take you like 3 seconds of mashing on your keyboard to set it up so
// you might as well.
'phabricator.csrf-key' => '0b7ec0592e0a2829d8b71df2fa269b2c6172eca3',
// Version string displayed in the footer. You probably should leave this
// alone.
'phabricator.version' => 'UNSTABLE',
// -- Files ----------------------------------------------------------------- //
// Lists which uploaded file types may be viewed in the browser. If a file
// has a mime type which does not appear in this list, it will always be
// downloaded instead of displayed. This is a security consideration: if a
// user uploads a file of type "text/html" and it is displayed as
// "text/html", they can eaily execute XSS attacks. This is also a usability
// consideration, since browsers tend to freak out when viewing enormous
// binary files.
//
// The keys in this array are viewable mime types; the values are the mime
// types they will be delivered as when they are viewed in the browser.
'files.viewable-mime-types' => array(
'image/jpeg' => 'image/jpeg',
'image/jpg' => 'image/jpg',
'image/png' => 'image/png',
'text/plain' => 'text/plain; charset=utf-8',
),
// -- Customization --------------------------------------------------------- //
// Paths to additional phutil libraries to load.
'load-libraries' => array(),
'aphront.default-application-configuration-class' =>
'AphrontDefaultApplicationConfiguration',
'controller.oauth-registration' =>
'PhabricatorOAuthDefaultRegistrationController',
+
+ // Directory that phd (the Phabricator daemon control script) should use to
+ // track running daemons.
+ 'phd.pid-directory' => '/var/tmp/phd',
+
);
diff --git a/scripts/daemon/phabricator_daemon_launcher.php b/scripts/daemon/phabricator_daemon_launcher.php
index a2c418b09b..6b9a11e776 100755
--- a/scripts/daemon/phabricator_daemon_launcher.php
+++ b/scripts/daemon/phabricator_daemon_launcher.php
@@ -1,81 +1,217 @@
#!/usr/bin/env php
<?php
/*
* Copyright 2011 Facebook, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
$root = dirname(dirname(dirname(__FILE__)));
require_once $root.'/scripts/__init_script__.php';
require_once $root.'/scripts/__init_env__.php';
-
+$phd_dir = PhabricatorEnv::getEnvConfig('phd.pid-directory');
+$pid_dir = $phd_dir.'/pid';
switch (isset($argv[1]) ? $argv[1] : 'help') {
+ case 'list':
+ phutil_require_module('phutil', 'console');
+
+ $loader = new PhutilSymbolLoader();
+ $symbols = $loader
+ ->setAncestorClass('PhutilDaemon')
+ ->selectSymbolsWithoutLoading();
+
+ $symbols = igroup($symbols, 'library');
+ foreach ($symbols as $library => $symbol_list) {
+ echo phutil_console_format("Daemons in library __%s__:\n", $library);
+ foreach ($symbol_list as $symbol) {
+ echo " ".$symbol['name']."\n";
+ }
+ echo "\n";
+ }
+
+ break;
+
+ case 'status':
+ $pid_descs = Filesystem::listDirectory($pid_dir);
+ if (!$pid_descs) {
+ echo "There are no running Phabricator daemons.\n";
+ } else {
+ printf(
+ "%-5s\t%-24s\t%s\n",
+ "PID",
+ "Started",
+ "Daemon");
+ foreach ($pid_descs as $pid_file) {
+ $data = Filesystem::readFile($pid_dir.'/'.$pid_file);
+ $data = json_decode($data, true);
+
+ $pid = idx($data, 'pid', '?');
+ $name = idx($data, 'name', '?');
+ $since = idx($data, 'start')
+ ? date('M j Y, g:i:s A', $data['start'])
+ : '?';
+
+ printf(
+ "%5s\t%-24s\t%s\n",
+ $pid,
+ $since,
+ $name);
+ }
+ }
+
+ break;
+
+ case 'launch':
+ phutil_require_module('phutil', 'moduleutils');
+
+ $daemon = idx($argv, 2);
+ if (!$daemon) {
+ throw new Exception("Daemon name required!");
+ }
+
+ $n = 1;
+ if (is_numeric($daemon)) {
+ $n = $daemon;
+ if ($n < 1) {
+ throw new Exception("Count must be at least 1!");
+ }
+ $daemon = idx($argv, 3);
+ if (!$daemon) {
+ throw new Exception("Daemon name required!");
+ }
+ }
+
+ $loader = new PhutilSymbolLoader();
+ $symbols = $loader
+ ->setAncestorClass('PhutilDaemon')
+ ->selectSymbolsWithoutLoading();
+
+ $symbols = ipull($symbols, 'name');
+ $match = array();
+ foreach ($symbols as $symbol) {
+ if (stripos($symbol, $daemon) !== false) {
+ if (strtolower($symbol) == strtolower($daemon)) {
+ $match = array($symbol);
+ break;
+ } else {
+ $match[] = $symbol;
+ }
+ }
+ }
+
+ if (count($match) == 0) {
+ throw new Exception(
+ "No daemons match! Use 'phd list' for a list of daemons.");
+ } else if (count($match) > 1) {
+ throw new Exception(
+ "Which of these daemons did you mean?\n".
+ " ".implode("\n ", $match));
+ } else {
+ $daemon = reset($match);
+ }
+
+ $libphutil_root = dirname(phutil_get_library_root('phutil'));
+ $launch_daemon = $libphutil_root.'/scripts/daemon/';
+
+ // TODO: This should be a much better user experience.
+ Filesystem::assertExists($pid_dir);
+ Filesystem::assertIsDirectory($pid_dir);
+ Filesystem::assertWritable($pid_dir);
+
+ echo "Starting {$n} x {$daemon}";
+ for ($ii = 0; $ii < $n; $ii++) {
+ list($stdout, $stderr) = execx(
+ "(cd %s && ./launch_daemon.php %s --daemonize --phd=%s)",
+ $launch_daemon,
+ $daemon,
+ $pid_dir);
+ echo ".";
+ }
+ echo "\n";
+ echo "Done.\n";
+
+ break;
+
case 'parse-commit':
$commit = isset($argv[2]) ? $argv[2] : null;
if (!$commit) {
throw new Exception("Provide a commit to parse!");
}
$matches = null;
if (!preg_match('/r([A-Z]+)([a-z0-9]+)/', $commit, $matches)) {
throw new Exception("Can't parse commit identifier!");
}
$repo = id(new PhabricatorRepository())->loadOneWhere(
'callsign = %s',
$matches[1]);
if (!$repo) {
throw new Exception("Unknown repository!");
}
$commit = id(new PhabricatorRepositoryCommit())->loadOneWhere(
'repositoryID = %d AND commitIdentifier = %s',
$repo->getID(),
$matches[2]);
if (!$commit) {
throw new Exception('Unknown commit.');
}
switch ($repo->getVersionControlSystem()) {
case PhabricatorRepositoryType::REPOSITORY_TYPE_GIT:
$worker = new PhabricatorRepositoryGitCommitChangeParserWorker(
$commit->getID());
break;
case PhabricatorRepositoryType::REPOSITORY_TYPE_SVN:
$worker = new PhabricatorRepositorySvnCommitChangeParserWorker(
$commit->getID());
break;
default:
throw new Exception("Unknown repository type!");
}
ExecFuture::pushEchoMode(true);
$worker->doWork();
echo "Done.\n";
break;
case '--help':
case 'help':
default:
echo <<<EOHELP
phd - phabricator daemon launcher
+launch <daemon>
+ Start a daemon.
+
+list
+ List available daemons.
+
+stop
+ Stop all daemons.
+
+status
+ List running daemons.
+
+stop
+ Stop all running daemons.
+
parse-commit <rXnnnn>
Parse a single commit.
EOHELP;
exit(1);
}

File Metadata

Mime Type
text/x-diff
Expires
Wed, Dec 3, 4:45 PM (1 h, 30 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
433764
Default Alt Text
(19 KB)

Event Timeline

styx copyright 2020 sirocyl / ellie (kymkdd) / ncommander / styx contributors
Use of other names and brands is not intended to reflect a claim of, or right to, use the name or brand.
styx is an operating system using the Linux kernel and components, and "styx Linux" as a phrase does not reflect the inclusion of the Linux brand or trademark in the styx project.
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Terms and Conditions (TODO: fix this!)