Page MenuHomestyx hydra
Files F1456810

configuring_preamble.diviner
No OneTemporary
Actions

configuring_preamble.diviner
View Options

@title Configuring a Preamble Script
@group config
Adjust environmental settings (SSL, remote IP, rate limiting) using a preamble
script.
= Overview =
If Phabricator is deployed in an environment where HTTP headers behave oddly
(usually, because it is behind a load balancer), it may not be able to detect
some environmental features (like the client's IP, or the presence of SSL)
correctly.
You can use a special preamble script to make arbitrary adjustments to the
environment and some parts of Phabricator's configuration in order to fix these
problems and set up the environment which Phabricator expects.
NOTE: This is an advanced feature. Most installs should not need to configure
a preamble script.
= Creating a Preamble Script =
To create a preamble script, write a file to:
phabricator/support/preamble.php
(This file is in Phabricator's `.gitignore`, so you do not need to worry about
colliding with `git` or interacting with updates.)
This file should be a valid PHP script. If you aren't very familiar with PHP,
you can check for syntax errors with `php -l`:
phabricator/ $ php -l support/preamble.php
No syntax errors detected in support/preamble.php
If present, this script will be executed at the very beginning of each web
request, allowing you to adjust the environment. For common adjustments and
examples, see the next sections.
= Adjusting Client IPs =
If your install is behind a load balancer, Phabricator may incorrectly detect
all requests as originating from the load balancer, rather than from the correct
client IPs. If this is the case and some other header (like `X-Forwarded-For`)
is known to be trustworthy, you can overwrite the `REMOTE_ADDR` setting so
Phabricator can figure out the client IP correctly:
```
name=Overwrite REMOTE_ADDR with X-Forwarded-For
<?php
$_SERVER['REMOTE_ADDR'] = $_SERVER['HTTP_X_FORWARDED_FOR'];
```
You should do this //only// if the `X-Forwarded-For` header is always
trustworthy. In particular, if users can make requests to the web server
directly, they can provide an arbitrary `X-Forwarded-For` header, and thereby
spoof an arbitrary client IP.
= Adjusting SSL =
If your install is behind an SSL terminating load balancer, Phabricator may
detect requests as HTTP when the client sees them as HTTPS. This can cause
Phabricator to generate links with the wrong protocol, issue cookies without
the SSL-only flag, or reject requests outright.
To fix this, you can set `$_SERVER['HTTPS']` explicitly:
```
name=Explicitly Configure SSL Availability
<?php
$_SERVER['HTTPS'] = true;
```
You can also set this value to `false` to explicitly tell Phabricator that a
request is not an SSL request.
= Adjusting Rate Limiting =
Phabricator performs coarse, IP-based rate limiting by default. In most
situations the default settings should be reasonable: they are set fairly high,
and intended to prevent only significantly abusive behavior.
However, if legitimate traffic is being rate limited (or you want to make the
limits more strict) you can adjust the limits in the preamble script.
```
name=Adjust Rate Limiting Behavior
<?php
// The default is 1000, so a value of 2000 increases the limit by a factor
// of 2: users will be able to make twice as many requests before being
// rate limited.
// You can set the limit to 0 to disable rate limiting.
PhabricatorStartup::setMaximumRate(2000);
```
By examining `$_SERVER['REMOTE_ADDR']` or similar parameters, you could also
adjust the rate limit dynamically: for example, remove it for requests from an
internal network, but impose a strict limit for external requests.
Rate limiting needs to be configured in this way in order to make it as cheap as
possible to activate after a client is rate limited. The limiting checks execute
before any libraries or configuration are loaded, and can emit a response within
a few milliseconds.
= Next Steps =
Continue by:
- returning to the @{article:Configuration Guide}.

File Metadata

Mime Type
text/plain
Expires
Sat, Nov 15, 12:40 PM (18 h, 1 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
337841
Default Alt Text
configuring_preamble.diviner (3 KB)

Event Timeline

styx copyright 2020 sirocyl / ellie (kymkdd) / ncommander / styx contributors
Use of other names and brands is not intended to reflect a claim of, or right to, use the name or brand.
styx is an operating system using the Linux kernel and components, and "styx Linux" as a phrase does not reflect the inclusion of the Linux brand or trademark in the styx project.
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Terms and Conditions (TODO: fix this!)